5.25" 2-Way In-Wall Speakers
|
|
By: Crestron
The World's Leader for Advanced Home, Campus & Building Control Automation Solutions
|
The product of expert Crestron ® audio engineering, Essence speakers deliver the pinnacle of performance for demanding residential installations. Select esoteric materials, top shelf components and a refined, high-end appearance underscore the meticulous design behind each model. The result is a complete line of in-wall and in-ceiling speakers worthy of a place in every room of the finest custom home.
The Essence line promises the ultimate in installed audio design, delivering simply stunning sound quality while minimizing any impact on your dةcor thanks to paintable zero-bezel grilles. Streamlined installation is facilitated through a spring-loaded toggle clamp mounting system.
The Essence-IW5 model provides a pair of 2-way in-wall loudspeakers featuring 5-1/4 inch long-throw woven Kevlar ® woofers for deep, defined low end, and large 1.1 inch advanced synthetic polymer dome tweeters for crisp, fluent highs, articulate midrange, and consistent coverage across a wider listening area. EssenceIW5 cast aluminum woofer baskets assure pure, uncolored bass response. Precision 4th order crossovers utilizing the highest quality components ensure a full, rich and detailed response across the spectrum. Power handling is an impressive 125 Watts (program), with a wide frequency response from 55 Hz to 20 kHz ( ±3 dB).
→ For indoor use only
→ Dimensions shown are per speaker, positioned vertically
→ Ultimate performance 2-way in-wall loudspeakers
→ 5.25" woven Kevlar® woofers
→ 1.1" advanced synthetic polymer dome tweeters
→ Precision 4th order crossovers
→ Cast aluminum woofer baskets
→ Extra large magnets and vented pole pieces
→ Zero-bezel frameless steel grilles, paintable
→ Spring-loaded toggle clamp mounting system
→ 125 Watts program power handling
→ 55Hz-20kHz frequency response
→ 8 Ohms nominal impedance
→ Sold in pairs
Woofer |
5.25 inch (134 mm) woven Kevlar® w/rubber surround, vented pole piece & cast aluminum basket |
Tweeter |
1.1 inch (28 mm) advanced synthetic polymer dome, ferrofluid cooling, damped aperiodic rear chamber |
Crossover |
4th order Linkwitz-Riley |
Crossover Frequency |
2 kHz |
Impedance |
8 Ohms nominal |
Frequency Response |
55 Hz to 20 kHz (±3 dB) |
Frequency Range |
45 Hz to 20 kHz (-10 dB) |
Power Handling |
125 Watts program |
Sensitivity |
88.5 dB @ 1W/1m |
Input |
(2) spring terminals; Maximum Wire Size: 10 AWG |
Temperature |
41° to 104°F (5° to 40°C) |
Humidity |
10% to 90% RH (non-condensing) |
Baffle |
ABS plastic, black |
Grille |
Steel with textured finish, paintable, magnetically-held "zero-bezel" frameless |
Mounting |
Flush ceiling mount using 3 integral spring-loaded toggle clamps, 1.35 in (34 mm) maximum surface thickness, 3.10 in (79 mm) minimum mounting depth, 9.8 in (249 mm) high x 7.3 in (186 mm) wide recommended cutout |
Height |
10.42 in (265 mm) |
Width |
7.90 in (201 mm) |
Depth |
3.27 in (83 mm) |
Weight |
5.26 lb (2.39 kg) per speaker |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.